Wireless Flow Totalizer (FT1)

Highly Accurate Self-Contained Wireless Flow Measurement Solution.

  • Designed for liquid flow totalization
  • Compatible w/ 3rd-party turbine meters
  • Captures today’s & yesterday’s totals, raw totals, and instantaneous rate
  • High frequency range of 1 Hz – 10 KHz
  • High accuracy of ±0.01 %
  • Outputs volume in barrels, liters, gallons, or cubic meters
  • Over 6-year battery life
  • Class I, Division 1 (Zone 0), intrinsically safe
  • -40 ˚C to 70 ˚C / -40 ˚F to 158 ˚F
  • 900 MHz: Up to 7500 ft (2.3 km)
  • 2.4 GHz: Up to 4.3 miles (7 km)
  • Secure AES encryption

ULTIMATE COMPATIBILITY

The OleumTech® FT1 Wireless Flow Totalizer Transmitter is designed to work with virtually any third-party flow turbine meters for accumulating volume of liquid with high accuracy of ±0.01 %. Users have the ability to set the contract hour and set the flow rate to per second, minute, hour, or day. Users can also match the k factor and k factor units and display the volume output in barrels, liters, gallons, or cubic meters.

The FT1 provides a 2-pin pickup coil connector and a 1-inch mating union for connecting to a turbine meter.

BATTERY-POWERED

The FT1 Wireless Transmitter relies on power from a replaceable battery. The system is engineered to achieve maximum battery life, providing over 6 years of life from a single battery.

INTRINSICALLY SAFE

Designed for use in Class I, Division 1 (Zone 0) hazardous locations. The FT1 is intrinsically safe, meaning it cannot a cause a spark and can be serviced without being removed from a process.

LOCAL DISPLAY

The FT1 features a 32-character local LCD display for instantly reading process data, battery voltage, and RF strength (RSSI). When the display is set to configuration mode, users can set all of its parameters and connect to a network just using the push button interface without the need of any configuration cables.

BreeZ® SOFTWARE

The OTC Sensor Network is managed using the BreeZ Software by OleumTech, provided free of charge. The Flow Totalizer Transmitter can be configured using the push button interface or BreeZ Software.

COMMUNICATES WITH WIRELESS GATEWAY

The FT1 Transmitter is one of many Wireless Transmitters that communicates with an OleumTech Wireless Gateway within its network, creating a highly scalable network, accommodating virtually any level or I/O requirement.