Analog Output Module (for DH1)

Ideal for Integrating Analog Outputs to the DH1 Base Unit Gateway.

  • Designed for use w/ DH1 Wireless Gateway
  • 4x analog outputs
  • 1-5 V (3-Wire) / 4-20 mA (2-Wire)
  • 12-bit ADC Resolution
  • 9-24 VDC external power input
  • RS485 Serial
  • Class I, Division 2 (Zone 2)
  • -40 ˚C to 80 ˚C / -40 ˚F to 176 ˚F

4 ANALOG OUTPUTS

The OleumTech™ Analog Input Module is designed for easily implementing four analog outputs to the DH1 Base Unit Wireless Gateway. Each input can be independently selected for either 1-5 VDC (3-wire) or 4-20 mA (2-wire) mode of operation.

RS485 Serial

The Analog Output Module is equipped with two RS485 Serial ports (RJ-45) for allowing multiple I/O Modules to be daisy-chained to the DH1.

CLASS I, DIVISION 2 (ZONE 2)

The Analog Output Module is certified for use in Class I, Division 2 (Zone 2) hazardous locations and accepts 9-24 VDC external power. Its compact, small footprint form factor easily fits inside a NEMA enclosure.

BreeZ® SOFTWARE

The Analog Output Module is configured using BreeZ Software by OleumTech, provided free of charge.

COMMUNICATES WITH DH1 BASE UNIT

The Analog Output Module communicates with an OleumTech DH1 Base Unit Wireless Gateway over RS485 connection within its network, creating a highly scalable network, accommodating virtually any I/O requirement.